Home > Controls, Rear Sets > Clip-ons and Replacement Bars > Yamaha FZ09 Adapter Plate >

Yamaha FZ09 '14-'16 Adptr Plate W/Bars (1.5" Rise) - Woodcraft
Yamaha FZ09 '14-'16 Adptr Plate W/Bars (1.5" Rise) - Woodcraft


 
: $284.99



Product Code: WC_12-2409
Qty:

Description
 
Yamaha FZ09 '14-'16 Adptr Plate W/Bars (1.5" Rise) - Woodcraft

Our new FZ09 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.

Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. The 1 inch riser setup can be run in either the "up" or "down" position.

Rise Guide
1.5 inch rise, up position - 2.25 inch drop over OEM

NOTE: We do not recommend running the 1.5 inch in the down position with standard bars, as the clearance to the tank is very close. If you do decide to go this route, the 10MM spacer required and you can gain the additional clearance needed by running the extra long bars as this will move the grips away from the tank.

We've had several riders use the adapter plate in the "up" position on the street and in the "down" position for a track day. Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Controls, Rear Sets > Clip-ons and Replacement Bars > Yamaha FZ09 Adapter Plate